Looking for:
Avid media composer 8.6 manual free. Sibelius 8.6 Now Available—What’s New |
- Avid media composer 8.6 manual free
Support Center | Blackmagic Design
Important Information Avid recommends that you read all the information in /18341.txt release notes thoroughly before installing or using any new software release. The documentation describes the features and hardware of all models. Therefore, your system might not contain certain features and hardware that are covered in this documentation. If you are upgrading to Release 8. Only Mac OS 8.
If you do not have one of these on your system, you must install it. For продолжить on uninstalling or installing the operating system, see your Apple documentation. Contents Symbols and Conventions. Setting Deck Preferences for Digital Cut. Symbols and Conventions Avid media composer 8.6 manual free release notes use the following special symbols and conventions: Look here in the margin for tips. In this document, Avid drive refers to the Macintosh systems internal hard drive.
Apple Computer, Inc. Depending on your systems setup, нажмите чтобы перейти internal hard drive might have a different /20006.txt. An X indicates a known bug or limitation. Where appropriate, a workaround is provided. A note provides important читать information, reminders, recommendations, and strong suggestions. A caution means that a specific action you take could cause harm to your computer or cause you жмите сюда lose data.
For адрес страницы detailed information about each step, see the section referenced in these release notes.
Read these release notes completely. Ensure the USB hub is turned on, if available. For deck control and other peripheral devices, install any software drivers for the USB devices connected avid media composer 8.6 manual free the Avid system; see Installing Software Drivers on page Install Media Composer; see Installation Procedure on page Run all appropriate updaters; see Running Updaters on page Whats New for Release 8.
New Hardware ссылка Release 8. For information about hardware and software requirements, see Hardware and Software Requirements on page The Power Macintosh G4 system provides slots for the following boards:.
The serial board corrects an infrequent and intermittent system hang during batch digitizing. Avid is actively working on a solution to correct the system hang and to eliminate the use of the serial board.
For information about the serial board, see Hardware Configuration Change on page This section covers additional information about the USB devices.
The USB technology is rather new to the marketplace. While it offers some major benefits in terms of connectivity and choice of peripherals, Avid has experienced some intermittent problems with some USB devices.
Media Composer Release адрес. USB Mouse Not Responding If your Avid system is not used for a period of time approximately 1 hourthe mouse might not respond when you move it.
If this happens, disconnect the mouse cable from the keyboard avid media composer 8.6 manual free then reconnect it. You can perform this procedure with the Media Composer application open and the Macintosh turned on. Exit the Media Composer application. Change the USB device. Restart the Avid media composer 8.6 manual free system. Start the Media Composer application.
For information about the drive striping requirements, see Table 11 on page Poll deck during digital cut is a new option for this release.
/23494.txt Poll deck during digital cut option is avid media composer 8.6 manual free by default. During a digital cut, if this option is selected, Media Composer checks the deck for the current timecode and displays it in the timecode window of the deck controller. If you see degraded image quality on your digital cut particularly visible as noise during blackdeselect this option and rerecord the digital cut.
With the option deselected, the timecode display in the deck controller will not update for the duration of the digital cut. The digital cut to tape is frame accurate even привожу ссылку displaying the timecode in the Timecode увидеть больше of the deck controller. If a complex sequence successfully plays, but you receive video underrun errors during a digital cut, deselect the Poll deck during digital cut option and rerecord the digital cut.
When you place your bins and projects on Avid Unity MediaNet workspaces drive volumesseveral users can work on the same project at the same time. Each user can perform tasks from his or her own Avid system. The Media Composer application provides a simple locking mechanism to help you keep track of who is currently working in a bin.
The method allows one writer access and multiple readers access to a bin. Hardware and Software Requirements The following sections provide information about the Macintosh operating system, the Ethernet, random-access memory RAM requirements, required libraries and extensions, Avid processor boards, and Avid System Test Pro.
Make sure your drive has sufficient space. Otherwise, the Macintosh system might crash if you export any of the following file formats:. Memory requirements vary, depending on what applications you are running. Table 2 avid media composer 8.6 manual free the built-in RAM requirements for Release 8. New memory kits are available from Avid for updating your existing RAM configurations.
For details, contact your Avid sales representative. Table 3 lists the supported RAM configurations. Yes To take advantage of interleaving, you must have the same size and avid media composer 8.6 manual free chip in paired banks.
You might need to increase the Preferred size if you are working on large projects with Media Composer. If you increase avid media composer 8.6 manual free amount of memory allocated to the application, make sure to leave enough memory to run the Macintosh operating system and other applications, such as EDL Manager, AvidNet, and Help.
The operating avid media composer 8.6 manual free need for memory is dynamic; therefore, the operating system might require more memory when running certain processes. To change the amount of memory allocated to the application: 1. Click the application icon to avid media composer 8.6 manual free it.
Choose Get Info from the File menu. Choose Memory from the Show pop-up menu. The memory requirements appear. Double-click the number in the Preferred Size text box. Type the amount of memory you want to allocate to Media Composer. Do not set the Preferred size to less than the Minimum size. Click the close box in the upper left corner to close the Media Composer Info window.
Troubleshooting Memory Allocation Problems If you have problems starting or running Media Composer after adjusting the memory allocation, вот ссылка the desktop and choose About This Computer from the Apple menu. About This Computer shows avid media composer 8.6 manual free total built-in memory installed in your system, how much memory the operating system currently is occupying, and the largest unused block.
Depending upon the amount of free memory you have allocated to Media Composer, one of the following problems might увидеть больше when you start Release 8. A screen message warns you to close other applications to make more memory available. For more information on allocating memory to the application, see your Macintosh documentation. The application might not start and you might see an error message stating that the system was unable to load one of the required libraries.
The error message indicates that not enough free memory is available to run Media Composer or that the required libraries are not installed in the system. For information on installing the. Required Libraries and Extensions The libraries and extensions in this section must be installed on your Macintosh for the Media Composer system application to start. The following files are installed automatically in the Extensions folder during the Easy Install procedure:.
Pinnacle libraries you need the Pinnacle libraries even if you do not have the 3D Effects option. If a library or extension is missing and you attempt to start the Media Composer application, an error message appears stating that the required item is missing. The following files are installed by Apple with the operating system:. Ссылка на продолжение installation software automatically installs the file in.
The installation software also installs a backup copy in the Backup System Files folder in the Utilities folder. The Avid system checks whether the correct version is present at startup. If the correct version is not узнать больше, the system displays a dialog box requesting that you locate and install the correct version. The version for this release is 3. To check avid media composer 8.6 manual free version, select the file and choose Get Info from the File menu.
Locate the System folder on your Avid drive. Open the System folder. Open the Extensions folder. Check the version by selecting the file and choosing Get Info from the File menu. The correct version for this release is 3. Locate the Avid media composer 8.6 manual free folder on your Avid drive.
Video Editing Software - Media Composer - Avid.Media Composer - Wikipedia
While it offers some major benefits in terms of connectivity and choice of peripherals, Avid has experienced some intermittent problems with some USB devices. Media Composer Release 8. USB Mouse Not Responding If your Avid system is not used for a period of time approximately 1 hour , the mouse might not respond when you move it. If this happens, disconnect the mouse cable from the keyboard and then reconnect it.
You can perform this procedure with the Media Composer application open and the Macintosh turned on. Exit the Media Composer application. Change the USB device. Restart the Macintosh system. Start the Media Composer application. For information about the drive striping requirements, see Table 11 on page Poll deck during digital cut is a new option for this release.
The Poll deck during digital cut option is selected by default. During a digital cut, if this option is selected, Media Composer checks the deck for the current timecode and displays it in the timecode window of the deck controller. If you see degraded image quality on your digital cut particularly visible as noise during black , deselect this option and rerecord the digital cut. With the option deselected, the timecode display in the deck controller will not update for the duration of the digital cut.
The digital cut to tape is frame accurate even without displaying the timecode in the Timecode window of the deck controller. If a complex sequence successfully plays, but you receive video underrun errors during a digital cut, deselect the Poll deck during digital cut option and rerecord the digital cut.
When you place your bins and projects on Avid Unity MediaNet workspaces drive volumes , several users can work on the same project at the same time. Each user can perform tasks from his or her own Avid system.
The Media Composer application provides a simple locking mechanism to help you keep track of who is currently working in a bin. The method allows one writer access and multiple readers access to a bin. Hardware and Software Requirements The following sections provide information about the Macintosh operating system, the Ethernet, random-access memory RAM requirements, required libraries and extensions, Avid processor boards, and Avid System Test Pro.
Make sure your drive has sufficient space. Otherwise, the Macintosh system might crash if you export any of the following file formats:. Memory requirements vary, depending on what applications you are running. Table 2 shows the built-in RAM requirements for Release 8. New memory kits are available from Avid for updating your existing RAM configurations. For details, contact your Avid sales representative.
Table 3 lists the supported RAM configurations. Yes To take advantage of interleaving, you must have the same size and speed chip in paired banks. You might need to increase the Preferred size if you are working on large projects with Media Composer. If you increase the amount of memory allocated to the application, make sure to leave enough memory to run the Macintosh operating system and other applications, such as EDL Manager, AvidNet, and Help.
The operating systems need for memory is dynamic; therefore, the operating system might require more memory when running certain processes. To change the amount of memory allocated to the application: 1. Click the application icon to highlight it. Choose Get Info from the File menu.
Choose Memory from the Show pop-up menu. The memory requirements appear. Double-click the number in the Preferred Size text box.
Type the amount of memory you want to allocate to Media Composer. Do not set the Preferred size to less than the Minimum size. Click the close box in the upper left corner to close the Media Composer Info window.
Troubleshooting Memory Allocation Problems If you have problems starting or running Media Composer after adjusting the memory allocation, click the desktop and choose About This Computer from the Apple menu. About This Computer shows the total built-in memory installed in your system, how much memory the operating system currently is occupying, and the largest unused block.
Depending upon the amount of free memory you have allocated to Media Composer, one of the following problems might occur when you start Release 8. A screen message warns you to close other applications to make more memory available. For more information on allocating memory to the application, see your Macintosh documentation.
The application might not start and you might see an error message stating that the system was unable to load one of the required libraries. The error message indicates that not enough free memory is available to run Media Composer or that the required libraries are not installed in the system. For information on installing the. Required Libraries and Extensions The libraries and extensions in this section must be installed on your Macintosh for the Media Composer system application to start.
The following files are installed automatically in the Extensions folder during the Easy Install procedure:. Pinnacle libraries you need the Pinnacle libraries even if you do not have the 3D Effects option -.
If a library or extension is missing and you attempt to start the Media Composer application, an error message appears stating that the required item is missing.
The following files are installed by Apple with the operating system:. The installation software automatically installs the file in. The installation software also installs a backup copy in the Backup System Files folder in the Utilities folder.
The Avid system checks whether the correct version is present at startup. If the correct version is not present, the system displays a dialog box requesting that you locate and install the correct version. The version for this release is 3. To check the version, select the file and choose Get Info from the File menu.
Locate the System folder on your Avid drive. Open the System folder. Open the Extensions folder. Check the version by selecting the file and choosing Get Info from the File menu.
The correct version for this release is 3. Locate the Utilities folder on your Avid drive. Open the Utilities folder and open the Backup System Files folder. Restart the computer. To determine board revision levels, use Avid System Test Pro.
Avid System Test Pro displays information about the operating system, mounted volumes, system extensions, control panels, and peripheral boards. You can see a visual representation of drive space in the Hardware Tool window. Use Avid System Test Pro to view all other system information.
The Avid System Utility is no longer part of the utilities applications. Board functions that it performed are now performed by Avid System Test Pro. For information about the operating system version required for Media Composer Release 8. Two methods are available for getting a newer version of the Macintosh OS:.
Follow the instructions in Guidelines for Installing the Macintosh Operating System on page 24 of these release notes. When this occurs, fonts with corrupted resources cannot be moved. Verify the Macintosh system running OS 8.
If the file is missing, you can obtain the file from an Apple Computer dealer. Check the internal hard drive and repair any problems by using DiskWarrior Version 1. Failure to repair any problems found on the internal hard drive could result in a corrupt installation. Start the Macintosh from the Macintosh CD-ROM and perform a clean system software installation by following the instructions provided in the user guide supplied with the Macintosh.
If you don't use the Language Kit Updater, you will encounter Apple menu problems. Choosing the Avid Drive and Restarting If you changed your startup disk to install the OS, restart the Macintosh from the internal hard drive, using the following steps: 1.
Select the internal hard drive usually the Avid drive. The internal hard drive might be named Macintosh HD. Close the window and restart your Macintosh.
The system starts up from the Avid drive. If needed, you must install the USB device drivers and serial board driver before you install the Media Composer application. Install the software drivers for the USB devices and serial board in the following order: 1.
Serial board drivers are preinstalled 2. USB floppy drive. Do not install the Macally mouse software drivers. If you install the Macally software drivers, you cannot shuttle or scrub with the mouse. If the devices are connected to the Avid system before the software drivers are installed, you will receive error messages.
To eliminate the error messages, install the software drivers and restart the Avid system. You must turn off virtual memory and set the cache size to run the Media Composer software. If you have not already done so, do the following: 1. Choose the Memory Control Panels from the Apple menu. Set the Cache Size to K. Turn off virtual memory and close the window. Restart your Macintosh. The Macintosh OS has an Energy Saver control panel that can put your system, display, or hard drives into Sleep mode when you dont use them for a designated period of time.
If the internal hard drive goes into Sleep mode while your Media Composer system is running, the system might hang or crash.
To disable the hard disk Sleep mode on your Media Composer system, choose Energy Saver from the Control Panels list, and set the option Put the system to sleep when its inactive for to Never.
New systems are shipped with the current version of the Macintosh OS installed, but you should still verify that you have the current version. This installation overwrites any prior release of Media Composer software that is loaded.
If you prefer, you can save the old release of the Media Composer system software by renaming the folder on the Avid drive that contains the application. This also saves the old Settings and SupportingFiles folders.
If you have problems installing the software when using these instructions, try turning off any virus-checking extensions or other system-monitoring software running on your Avid system. Use the Extension Manager to turn off these applications, and then repeat the installation process. After installing the software, use the Extension Manager to turn on any virus-checking extension or other system-monitoring software that you normally run on your Avid system, and restart the system.
Do not install the Macally mouse software. To install Media Composer: 1. Restart your Avid system. Quit any applications that open automatically at startup. Insert the Avid Media Composer 8. Double-click the MC 8. The MC 8. A splash screen introduces the Installer. Click Click here to continue.
Avid Drive icon. The installation takes several minutes. Click Restart. For example, you might want to install only the EDL Manager files. You can also reinstall an individual component of the Media Composer system if it becomes lost or damaged. To perform a custom installation: 1.
Open the MC 8. Click Show Other Installations. Click any item that you want to install. Drag the highlighted items to the Avid Drive icon. The system proceeds with the installation. After the installation is complete, the system asks whether you want to install additional items or quit the installation procedure.
With your upgrade package, you received a dongle Updater floppy disk. This will update your application key to run the Media Composer Release 8. For more information about the application key, see Warning Regarding Your Application Key on page To update your application key: 1. Insert the Updater floppy disk. Double-click the Updater icon. The Updater window opens.
Double-click the Updater for Media Composer model icon. The updater updates your application key. Choose Control Panels from the Apple menu. Choose Extensions Manager. The Extensions Manager window opens. If an X appears, click the check box to disable the file.
The updaters are:. Test Patterns Test patterns are no longer located in the Goodies folder. They are now located in the SupportingFiles folder and should be imported with video levels.
Software Utilities Table 5 lists software utilities, current revision levels, and the folders where the utilities are located. QuickTime exports that use source compression will be readable on any Windows NT application capable of reading QuickTime. Those applications will also be able to export native Avid resolution QuickTime files for fast-import to Media Composer. For a complete description of moving projects, media files, and graphics to and from Avid products, see the Avid Products Collaboration Guide.
Moving to Media Composer Release 8. This section includes instructions for moving work to Media Composer Release 8. When you are moving projects to Media Composer Release 8. Table 6 lists the products from which you can move project files to Media Composer Release 8.
Before beginning a project that you will be moving to Media Composer Release 8. This format allows the simplest method of transferring audio files between the two applications.
To transfer project files to Media Composer Release 8. Prepare the project files for export. Transfer the project information. Open the project and redigitize. Batch import graphics. Transfer or import audio files. Import any graphics or effects files. Re-create the title media. Render non-real-time effects. The Avid Media Composer model and the exact options you have determine which effects are available.
Key to Table The information in this section is accurate for Media Composer Release 8. The available effects can change with a new release of the system and might not be reflected in this document. Special Notes This section contains important information about system-level changes that affect the way your Media Composer software and hardware operate.
The application key, commonly referred to as a dongle, allows your Media Composer application to operate. Protect your application key from loss or theft; your Media Composer system cannot function without it, and acquiring a new key from Avid involves a fee. Drive Striping Configurations This section provides the drive striping information available when Media Composer Release 8. This information refers to the number of drives that need to be striped to achieve a specific resolution.
For the latest drive striping configurations, see Obtaining the Latest Drive Striping Configurations on page Table 8 lists the families, their specifications, and their available capacities. For additional information on a specific MediaDrive or MediaDock shuttles, see the setup and users guide that shipped with the MediaDrive or the MediaDock shuttle.
The family name of your drive can be found on the front of the MediaDrive or MediaDock shuttle. The information is based on support for:. Table 9 is a guide for productions with typical edit densities. For projects involving high-cut densities extensive cuts at fewer than frame edits , Avid recommends increasing to the next striping increment.
Table 10 is a guide for productions with typical edit densities. Avid recommends switching to 8-way striping for projects that use extensive cuts of fewer than frame edits. For projects involving high-cut densities extensive cuts at fewer than frame edits , you must render before you play back switching to 8-way striping will not help.
Table 12 is a guide for productions that use extensive cuts of fewer than frame edits. Use of 8-way striping for drives not shown in the table does not gain you any functionality over 4-way striping. Table 13 is a guide for productions with typical edit densities. Obtaining the Latest Drive Striping Configurations When drive configurations are tested and when drives and software are released, the most up-to-date drive striping configurations are available in the Documentation section of the Avid Customer Service Knowledge Center.
To access drive striping information from the Avid Web site: 1. Click the Avid Customer Service link at www. Click Knowledge Center. If you are not already a registered user of the Knowledge Center, register now. Registered users can access more information. Click Products. Click Documentation. Click Release Notes. Links to the latest drive striping information are posted here.
If you have trouble navigating to this document in the Knowledge Center, search for drive striping. The Fibre Channel driver searches for drives. Quit Media Composer. Duplicate the current set of extensions and rename the file.
Disable the Avid Fibre Channel Driver on the duplicated set of extensions. Restart the Macintosh. For information about changing the memory size, see Changing the Memory Allocated to the Application on page Calibrating Audio Hardware You can now use the Audio Settings dialog box to change your default audio hardware calibration. After you change the applications hardware calibration setting value, the following settings also change to match:.
Double-click Audio in the Settings scroll list of the Project window. The Audio Settings dialog box appears. An alert box appears. Messages in this thread Problems with reading scores from earlier versi Hide picture. Quick reply To add a reply to the end of this thread, type it below, then click Reply. Re: Problems with reading scores from earlier v Attachment snap1.
Back to top All threads. Re: Problems with reading scores from earlier versions that contain slides into Sibelius 8. Each computer was loaded with full memory probably 4 megs at the time , and a full complement of Apple software pre-Claris.
That afternoon, a consultant knocked on our door saying, 'Hi. I'm being paid by Apple to come here and port your applications from Apollo to Macintosh. The Avid engineering team, however, managed to get 1, kBytes per second, which allowed them to do offline video on the Macs.
The Avid Film Composer was introduced in August Film Composer was the first non-linear digital editing system to capture and edit natively at 24fps. Steven Cohen was the first editor to use Film Composer for a major motion picture, on Lost in Yonkers The system has been used by other top editors such as Walter Murch on The English Patient , the first digitally edited film to receive a Best Editing Oscar.
For continued development, Avid received an Oscar representing the Scientific and Technical Award for the concept, design, and engineering of the Avid Film Composer system for motion picture editing.
Film Composer is no longer available, since all of its specific film editing features were implemented into the "regular" Media Composer. The Avid Media Composer user interface has seen many changes and upgrades over the years.
Early versions focused on creating somewhat of a digital representation of the film editing process. The idea of organizing clips using bins was a familiar concept, so it was easy for editors to migrate from the flatbed editing world into Avid's digital interface.
Through the 's the interface saw practical upgrades which were made in collaboration between its designers who were also working editors, and professional editors working in Hollywood and at network television studios. The interface design remained decidedly plain and two-dimensional. Interface design was focused more on clip management in the Timeline Window than on UI colors and buttons.
Crossing Y2K and into the early 's with Media Composer 10, 11, and 12, the user interface saw significant advancements in not only project organization but also skeuomorphic design.
It gave users incredible power in defining their own preferences in button shapes and shading, color coding, workspace architecture, and other intricate customizations. In May when Avid Adrenaline introduced HD editing and a resetting of the version numbering back to 1. With the release of Media Composer 5, the user interface saw a drastic change.
After extensive testing, the skeuomorphic design and other visual elements were realized to be causing a slight drain on graphics card performance. It was decided to scale-back the design and chase a flatter approach. Users who upgraded to this version were initially upset at the loss of customizability but were indeed satisfied with the noticeable reduction in interface lag.
By Media Composer 7, 8, and , there was a consistent outcry from customers to upgrade the overall interface. During , Avid conducted extensive interviews, listening sessions, and ACA meetings with hundreds of users to absorb as much of their opinions as possible. Key outcomes from those sessions included needs for stronger organization abilities for bins bin containers , tools and other interface elements that could snap-to each other, a "paneled" interface that could mold itself to any screen size or configuration, and a means of toggling between the classic concept of Avid Workspaces in a newer, more accessible way Workspace Toolbar.
Another common complaint of the classic interface was its overall performance, which had laggy timeline behavior in comparison to other nonlinear edit systems NLEs. While the Media Composer team worked on the new user interface, the engineers and architecture team retooled the underlying code and video engine. In June of , Avid released Media Composer Users saw consistent upgrades to the user interface throughout , , and As of late , the majority of Media Composer users were subscription-based, and using the modern user interface.
Avid Mojo DX : a newer version of the Mojo with architecture offering faster processing and full x HD resolution in addition to standard definition video.
No comments:
Post a Comment